1 / 4
CR10 SMART LED BARS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 led bars made for the cr10 smart.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 78
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
You can use the connections on the daughter board shown in the image to plug the strips, IMPORTANT IT MUST BE A 24V LED STRIP or you will fry the LEDs or even something worse, you will also need a 2 jst xh2.54 connectors.
You can use any led strips if you don't want to use the printer power.
The front bar has a small hole on the left to pass the wire to connect to the daughter board, the rear one has a gap to help whit this as well.