Bambu XY Idler Pulley Toothed Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a quick split toothed pulley to convert the smooth XY idler pulleys on Bambu printers to toothed.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 94
- Makes
- 0
- Views
- 1,990
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
BEWARE! Preform at your own risk, you take full responsibility for your printer and actions. This modification WILL damage your printer if not installed correctly. Please be careful.
Suggest print in PETG at .16 or higher with .4 or lower nozzle. Split print, post process a bit if a brim was required and use some thin permeant scotch double sided tape to adhere to the CLEAN smooth idler pulleys. Use the XY movement in the settings to help facilitate the installation. If you cannot figure how to install this modification from these instructions, you probably shouldn't be doing so.