1 / 1
Bambu Labs P1P High Top for Vision Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Higher Top for the Vision Case to get more space for the Hotend Cable and PTFE
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 94
- Makes
- 0
- Views
- 1,179
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I wanted more space for the Hotend Cable and the PTFE Tube and no cable chain, so i designed this extension for the case on which you place the top glass. Front and rear parts need to be mirrored in the slicer, to get the opposite side. You need 16 M3x6 Screws.
There are two Versions, one with the Screws outside and the new Version 2 with the screws (not visible front outside) on the inside without the separate mounting plates. In Version 2 you only need the four sides and screw them with 8 M3x6 screws together.