1 / 4
Cable Management Clips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Some screwable cable clips.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 46
- Makes
- 0
- Views
- 559
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- GNU General Public License v3.0
I need to organize the cables under and behind my computer desk, so I decided to design these in F360. They are “over-engineered” in the sense that they each require two m3x8 screws and 2 m3x5x4 heat-set inserts.
I designed these to use some vhb tape to the back of my desk, which is why one has a pattern and the backside is flat.
You will also need:
- vhb tape
- 2x m3x5x4 heat-set inserts [heatsets from DFH here]
- 2x m3x8 screws
or
- vhb tape
- 4x m3x5x4 heat-set inserts
- 4x m3x8 screws
the heatsets listed are the exact ones this is designed around.
Recommended Print Settings:
- 100% Infill
- .2 layer height
- Slower is better
Instructions
- Insert 2x heatset inserts into the bottom piece.
- Use some vhb-tape to adhere them to your desk.
- Run your cables, and clunkly manage to screw in two m3x8 screws to seal the deal
- Enjoy