EOS2 Mobula7 canopy (should fit any "whoop" style quad)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I broke the HappyModel EOS2 canopy that I purchased, the screws ripped right out of screw holes, also the camera angle…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 87
- Makes
- 0
- Views
- 425
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I broke the HappyModel EOS2 canopy that I purchased, the screws ripped right out of screw holes, also the camera angle would change every time someone sneezed in my house so I figured it was time to design a new one.
I did design this so that the screws with the big heads that come with the Mobula7 replacement FC and the UR65 fit this canopy.
lol it seems like I get better and better with each new canopy I design.
WARNING!!! I do use the HappyModel Whoop VTX so I did not have to really worry about the VTX fitting so if you are using a different type of VTX it may have space limitation issues, it SHOULD work just fine with a beta6/75x vtx to use with the EOS2.
In the picture where there is a red canopy and a clear canopy the red one is printed in PETG the clear one is TPU.
It comes in at 2.8 grams.
I print at 0.1mm layer height, infill doesn't matter as it is just 2 perimeters, and support.
If printing TPU then turn off retraction, TPU doesn't really like retractions being on.
Have fun and happy flying.
Category: R/C Vehicles