MMU2 PTFE PC4M6 Coupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For ease of access to the filament while loaded in the PTFE tubes I really liked the 'Prusa MMU2 PTFE Holder M10…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 55
- Makes
- 0
- Views
- 453
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
For ease of access to the filament while loaded in the PTFE tubes I really liked the 'Prusa MMU2 PTFE Holder M10 Passthrough Adapter' (https://www.thingiverse.com/thing:3233579), but in my own setup I just cannot reach the back of the MMU2S unti very easily. So I decided to move the acces point for the filament further down away from the unit and use some PC4-M6 tube fittings.
The original coupler works great already, but I needed it to be somewhat bigger, and made some windows in it so I can actually see the filament inside.Since this coupler sits at a point where the filament did already pass when loaded, it is not neccessary to insert a piece of PTFE tube into the coupler itself.
The window do also allow to put an occasional drop of oil on the filament.
EDIT
I don't know why the preview obviously shows a render error. The thingiview - View does not implicate that there is a problem with the model, and slicing with slic3r PE didnt reveal any problems either. Please let me know if you encounter problems slicing this with a different slicer.
Print Settings
Printer Brand:
Prusa
Printer:
MMU2s
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
100%
Filament: Das Filament PLA tom's infinity blue
Category: 3D Printer Accessories