LED Light Switch replacement retainer thingie...
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement retainer/spring like part for those battery powered twin LED cob light switch lights. They're…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a replacement retainer/spring like part for those battery powered twin LED cob light switch lights. They're neat little lights and handy for places like closets and such.
If you plan on modifying them, or just take one apart for curiosity's sake, you might lose or break this little piece that sits between the the outside switch assembly you flip and the actual PCB switch it interacts with.
This piece seems to hold the external part of the switch in place after you flip it.
I've lost or broken a few of these little pieces, so I finally decided to try printing a replacement, and it worked pretty well, so here it is.
I highly recommend printing this piece on it's side for maximum strength. (pictured above)
There are two variants, the second should work if the fist one doesn't, and being small these parts don't take long to print at all.
Enjoy!!!
Print Settings
Printer:
Sooway SW-200
Rafts:
Doesn't Matter
Resolution:
0.4
Infill:
100
Filament: GizmoDorks ABS Glow in the Dark Blue
Notes:
0.4mm nozzle, 0.2mm layer height.
Make sure you know your material's shrinkage ratio, especially for ABS, etc.Category: Other