MK3(S+) Base Plate
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.74 – €7.01 net (excluding VAT)
For file: mk3s-base-plate_02mm_pla_mk3s_5h41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.37 excluding VAT (range midpoint).
- Weight reported by the author
- 94 g
- Print time reported by the author
- 5.69 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple base plate for all Prusa MK3 models. The plate is simply pressed into the profiles from below.
- Rating
- 4.919 / 5
- Likes
- 313
- Downloads
- 1,490
- Makes
- 39
- Views
- 10,999
- Reviews
- 37
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple base plate for all Prusa MK3 models.
New: I added a version which has holes to fix it with four screws (M3x10) and T-nuts. This is more stable than the first version. I recommend to stick some foam rubber or similar as shown in the pictures on it to prevent vibrations.
The plate without holes gets simply pressed into the profiles from below.
If you like check out my other designs too!