Rad Power Bikes Power Brick Wall Mount (RadCity 3)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for attaching an ebike power brick to the wall using screws and zip ties.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 36
- Makes
- 0
- Views
- 281
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Wall mount for the power brick for a Rad Power Bikes RadCity 3 (though may be compatible with many other power bricks if you check your size), with channels to use zip-ties for mounting. Holes are sized for #10 screws. This mount also ought to work for other power bricks of similar dimension with center-mounted IEC connectors and output cable. For reference, the internal dimensions are 168.4mm x 71.75mm x 35mm deep.
I printed in the default orientation and used supports for the bottom of the channel, since it doesn't need a perfect finish and will be facing the wall. The channel is only 15mm wide, so you may be able to print without support and bridge that gap with a good result.
I printed mine in PLA on a Sovol SV06. 3 walls, 3 top/bottom layers, 20% gyroidal infill. All pretty basic settings and you could definitely use less robust settings than I did.