1 / 4
Rad Power Bikes Power Brick Wall Mount (RadCity 3) — zdjęcie 1
1 / 4

Rad Power Bikes Power Brick Wall Mount (RadCity 3)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wall mount for attaching an ebike power brick to the wall using screws and zip ties.

Ocena
0 / 5
Polubienia
7
Pobrania
36
Wydruki
0
Wyświetlenia
283
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Public Domain

Wall mount for the power brick for a Rad Power Bikes RadCity 3 (though may be compatible with many other power bricks if you check your size), with channels to use zip-ties for mounting. Holes are sized for #10 screws. This mount also ought to work for other power bricks of similar dimension with center-mounted IEC connectors and output cable. For reference, the internal dimensions are 168.4mm x 71.75mm x 35mm deep.

I printed in the default orientation and used supports for the bottom of the channel, since it doesn't need a perfect finish and will be facing the wall. The channel is only 15mm wide, so you may be able to print without support and bridge that gap with a good result.

I printed mine in PLA on a Sovol SV06. 3 walls, 3 top/bottom layers, 20% gyroidal infill. All pretty basic settings and you could definitely use less robust settings than I did.

Tagi