1 / 2
Case for WLED 5V 20A PSU & NodeMCU on a prototype board
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for a 5V 20A HoneyWell-style PSU off AliExpress and a spot for a NodeMCU ESP32 on a prototype board.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I started building myself a hex panel led lamp, and needed a clean way of hiding the ugly PSU and WLED board.
A case for a 5V 20A HoneyWell-style PSU off AliExpress and a spot for a NodeMCU ESP32 on a prototype board.
Attach lid to case with some kind of screws, the holes are set for ~4.5mm self-tapping screws (4.22mm clearance).
The screws for the uPesy medium prototype board should be ~3.5mm.
I printed mine on a P1P with a 0.6mm nozzle, total print time was around 12 hours.