Gridfinity LTT Screwdriver Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity Bin for holding the LTT Screwdriver
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 96
- Makes
- 5
- Views
- 527
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
All my models are free, however, my Paypal is http://paypal.me/Stu142 if you wish to buy me a coffee or help fund the failed prototypes and time spent on this model. Much appreciated if you do. Thanks!
This is a gridfinity bin for holding an LTT Screwdriver (Amazon).
There are 3 configurations with different mounting hole combinations on the bottom. They are designed using sequential bridging so no supports are needed.
1. magnets = Press fit magnets.
2. M3 = Space to screw the bin down from the bottom with a M3 screw, works with some bases.
3. HSI = M3 heat set insert, which you can set with a soldering iron and screw the bin to the base.
Similar to Hardware Used (Affiliate Links).
6mm x 2mm Magnets https://geni.us/X9t1M (Amazon)
M3 Screw Set : https://geni.us/gfP7w (Amazon)
M3 Heat Set Insert: https://geni.us/Svm0Sl (Amazon)