1 / 3
Parkside X20V Vacuum (PHSSA 20-Li C1) Ejector Button Replacement
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement container eject button for Parkside X20V Team vacuum devices
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 143
- Makes
- 2
- Views
- 1,959
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Printing
Material: PLA or ABS
Infill: 100%
Wall Count: 3+
I would recommend printing the eject button sideways for added durability.
You might need to clean off the support interface layer using an utility knife before installation, as it can interfere with the tight tolerances required.
Installation
The installation itself is really simple:
- Undo the 7 Philips screws holding the device together (2 screws are under the container)
- Remove the original ejector button
- Insert the spring from the original button into the new one
- Install the new button by pressing down on the spring while placing it in
- Screw back all 7 screws into the side of the device.