CR10 v2 Floating Tool Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CR10 v2 tool tray, attaches using T nuts.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 1
- Views
- 340
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
CR10 v2 tool tray, attaches using T nuts.
I modified my first version it to be flush with the rail sizing putting the T nuts in the center for aesthetics, but also made it slightly thinner as well.
VERSION 2
This version I extended 2 of the micro sd slots to work with full size SD cards and converted the small wrench slots different and cut open all the way through the nozzle holes as I could knock them off too easy with the original design....assuming becuz when I made it thinner the original slots werent as deep anymore......I also trimmed 1mm off each side just to make it a little less material.