Invisible LED strip mount 2020 extrusions
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flat (cob) LED strip brackets for 3d printers with an aluminum bar from a local shop.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 741
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Mount your leds in a neat way. This mod makes soft led strips hard by putting them on an alu strip. Multiple aluminum strip sizes available. I used 15x2.
Necessary hardware per strip:
- 2 m3 T-nuts
- 2 M3x8 bolts
- 2 prints
Assembly instructions:
Cut the aluminum strip at LED strip length + 2 cm. I used 35cm long leds so my alu strips were cut at 37cm. Put the prints at the end and drill through the aluminum in the holes [I used 3.2mm drill]. Then put the LED strip on, put T-nuts in your extrusions, and put the bolts in.
Klipper config:
[output_pin caselight]
## Chamber Lighting - In 24V-RGB Position
pin: PB6
pwm: true
shutdown_value: 0
value:0.01
cycle_time: 0.01