LM10UU, LONG LM10UU (MK4 Z Rod Bearing), & LONG LM10UU CAP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slightly reduced Ø for 10mm nozzle insertion section.
- Rating
- 5 / 5
- Likes
- 37
- Downloads
- 266
- Makes
- 8
- Views
- 1,193
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Please try the original authors version before trying the altered version.
I had a little trouble with the original 10mm diameter being a little too big, so I used some of the new features in PrusaSlicer 2.6.0 to change it up a little. First, I cut it just above the threads for the cap (using the “Parts” checkbox and not “Objects”), because I didn't want to alter the threads for screwing it onto the SuperLube or the dust cap, and then scaled down the top part in X and Y to 95%. Next, I used the measurement tool to verify that the dimensions were what I wanted. Then I sliced and printed it (textured plate) using 0.20mm Quality for MK3S+ adding a 4mm brim with a 0.24 gap and bumping perimeters to 4. An hour later I had a well fitting nozzle.
Knowing that I had a working lubricating tip I did a couple more cuts, a copy/paste, a z move up, and voila I now had an extended version that would allow me to properly lubricate my MK4 z rod bearings. Honestly, it took me longer to write this than it did for me to do all the different operations in PrusaSlicer 2.6.0. Really liking all the new features they've added.