Filament Sample Spool
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.77 – €2.16 net (excluding VAT)
For file: Filament Sample Spool_Part B _0.4n_0.3mm_PETG_MK3S_2h6m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.96 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 1.8 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Another Filament Sample Spool...
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 2
- Views
- 313
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
You can find a lot of replacement spools for filament samples on this site. My construction is as lightweight as possible.
I wanted to create a functional spool that prints quickly, no threads, you just glue the two parts together, wind a sample of filament, put it in a bag (IKEA STAD 2,5l).
And why does the spool have a larger diameter? Well, small amounts of filament tend to unwind from the spool. However, if I wind it to a larger diameter, the filament holds in a self-clamping manner.
Print instructions:
I recommend printing from PETG, possibly ABS or ASA. You can also use PLA, but then the spool may be damaged during drying.
Printing the model does not require any special settings. See the attached 3MF file for detailed print settings. No supports.
Assembly Instructions:
Both parts are simply glued with Superglue or Epoxy Adhesive.
Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
You can customize the model by simply changing variables.
Note:
Please don't forget to leave a rating or a comment. Feedback is important for me Thank you very much.
Print visions, create reality!