1 / 1
Camera/Light Universal Railmount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera/Light Mount using the Standard Camera Thread that attaches to the rails of a printer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 93
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This is a little model that i made to attach a light to my Ender 3 V2 so i could have adequate lighting for time lapses and viewing using octopi, without needed to leave the room's light on. Made in Fusion 360.
Works Universally across many different printers, and uses the standard camera threads.
The threads tend to snap if you tighten too much, so be careful with that. Printed using PLA at 205 degrees, 60 degrees bed temp, and 0.2 layer height.