Tool to Open Fuel Pump Cover (Mazda)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€10.45 – €12.77 net (excluding VAT)
For file: benzinpumpe_0.6n_0.3mm_PETG_MINI_7h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €11.61 excluding VAT (range midpoint).
- Weight reported by the author
- 255 g
- Print time reported by the author
- 7.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
To open the cover which holds the fuel pump in place.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 34
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had to replace the fuel pump on a Mazda 6 but the cover does not open easily. There are tools available which are made from steel and can be adjusted for different diameters, but I couldn't get my hands on one of these and it was a long weekend so I decided to print one.
The tool fits very nicely and worked surprisingly well. I used a hammer handle to get the necessary torque for opening.
This is the second try, my first design cracked due to warping at the print. This design has large holes to prevent the warping.