Ender Switchwire Stacked Raspberry Pi Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stacked mount to mount the Raspberry Pi on top of the BTT Skr Mini board.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 29
- Makes
- 0
- Views
- 666
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There was lot's of clearance above the BTT Skr Mini in my Ender Switchwire build, so I've created a mount for the RPI to go on top of the BTT Skr Mini board.
This is mainly because I need more space to implant CAN bus and relays.
BOM:
4x 10mm M3 M/F risers / spacers (see picture for reference, I've used 8x 5mm).
4x M2.5 6mm fasteners (for mounting the Pi).
Print Settings:
Nozzle: 0.4
Material: ABS/ASA
Perimeters (walls): 4
Solid bottom layers: 4
Solid top layers: 4
Infill: 40%
Credits:
- The Voron team for designing awesome stuff!
- DaRk_dOg for designing the awesome Ender Switchwire modification.