Ikea Tärnö table locking mechanism replacement
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.57 – €0.69 net (excluding VAT)
For file: ikea_table_lock_0.4n_0.2mm_ASA_MK4_30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.63 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 30 min
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Ikea Tärnö table locking mechanism replacement using M6 bolts and a wing nut
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
As the locking mechanism of my Ikea Tärnö table broke (soft metal + thread = bad), I designed a replacement part. It's working with an hex M6 bolt (lengths of 15mm to 20mm will work) and a wing nut. The screws of the existing mechanism are reused.
I'd suggest printing with UV-resistant materials like ASA or PETG with 100% infill and supports on build plate only. Also keep in mind to use stainless steel bolts and nuts when used outdoor.