1 / 4
2.2kw 80mm Spindle Dust Boot with MQL pass thru
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a dust collector with a pass thru for a standard MQL system.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 104
- Makes
- 0
- Views
- 875
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a dust collector with a pass thru for a standard MQL system.
2023-10-17 Now the fusion file is there
You will require:
- 3x 10mm M3 screw ( Amazon / Aliexpress )
- 3x M3 heat set insert (4.6mm OD) ( Amazon / Aliexpress )
- 12x 8mm diameter x 3mm high magnets ( Amazon / Aliexpress )
- 70mm Brush Vacuum Cleaner Dust Collector Engraving Machine Dust Cover for CNC Router Spindle Motor ( Aliexpress )
- CA glue
Fits for
- 1x Mister MQL system,
- 1x 80mm spindle
- 1x Shop vac with a 1-1/2" (38mm) hose
Steps:
- Print both parts
- Insert heat inserts on the left side of the dust boot
- mark north and south of magnets with a marker
- glue magnets, one in each hole of each part. be sure north and south will face each other when you will install the bottom portion.
- Install the vaccum Brush in the bottom slot. It should be tight enought to not use glue. if it come loose, you may glue it.