1 / 2
MadLabRemix - DJI Googles/DJI Goggles RE Wall Mount — image 1
1 / 2

MadLabRemix - DJI Googles/DJI Goggles RE Wall Mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DJI Goggles/DJI Goggles Racing Edition (RE) wall mount. No supports.

Rating
0 / 5
Likes
5
Downloads
25
Makes
0
Views
429
Reviews
0

Updated at source:

Model information

Category
Wall-mounted
License
Creative Commons — Attribution — Noncommercial

I am unable to find a wall mount for my original DJI Goggles so I made this.  I believe this should also fit the DJI Goggles Racing Edition.

When I design or remix, I try to minimize material cost and printing time while keeping it functional.  

HAPPY PRINTING and REMIX AWAY!!! Let me know if you have any questions. 

Please LIKE if you LIKE them! Thank you!!!

BOM TO BUY: (As an Amazon Associate I earn from qualifying purchases.)
PLA/PLA+/PETG/ABSKingroonhttps://amzn.to/457lvnV 

Notes: PLA recommendations I use are above.

BOM TO 3D PRINT:
 Material UsagePrint Time
DJI_Goggles_Wall_Mount181g (60.72m)13 hrs 3 mins

Notes: 

PRINT/SLICER SETTINGS: 
3D PrinterEnder 3 (Direct Drive)
SlicerUltimaker Cura 5.4.0
Nozzle0.4mm
Layer Height0.28
Wall Line Count3
Bottom/Top Thickness1.3
Infill5% (Adjust as needed)
Print Speed80mm/s
Retraction Distance/Speed0.8mm @ 45mm/s
SupportsNone
Adhesion TypeBrim 2mm (As needed)
Print OrientationBack Side Down

Notes: Nozzle and bed temperature depends on the manufacturer of filament you are using. Use manufacturer's suggested temperature.

STL FILES
DJI_Goggles_Wall_Mount

Tags