1 / 2
Corner LED - Clicks Together
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a corner LED with no screws to create an ambient light source in a room. Looks very clean.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 0
- Views
- 304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
This Corner LED is a very simple design that prints pretty quickly. I printed it on a Bambu X1 but if you have a smaller build plate then I would scale down all the parts equally to fit. On the Bambu, I had to print them at an angle flat.
They attract to the corner of the wall via TWO push pins at the top and bottom of the extending arms. I just put some hot glue in the hole and stuck a push pin in.
For this build, I used an ESP32 and WLED to get more effects and uses out of my light.