60MM GUIDE SCOPE TO MAIN SCOPE ADAPTOR PLATE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches the svbony 60mm guidescope to skywatcher 72ed scope
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 26
- Makes
- 1
- Views
- 378
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Enhance your astrophotography setup with our 60mm Guide Scope to Main Scope Adaptor Plate. Achieve seamless alignment for flawless guiding. Elevate precision and capture stunning deep-sky wonders. Upgrade your imaging experience and ensure every shot under the stars is picture-perfect!
A simple adaptor that allows you to take the Svbony (non-name brand) Guide scope and attach it onto a Skywatcher tube ring using the screws that comes with both scopes.
Here I've used 2 1/4 inch camera screws to clamp down, I recommend 20% infill but double up and the infill line for increased strength.
Part has been designed to print without supports, you just need to break through the thin layer in the two smaller holes which are used for bridging.