Fridge-Freezer Handle Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle Holder for Bomann KG 183 fridge-freezer combination
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 17
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
The door handles of my Bomann KG 183 fridge-freezer combination did not withstand the swinging opening of the kitchen door by my children. The actual handle is on metal. The handle holders were the weakest link in the chain ;-)
No idea if the holders also fit other models. In any case, they hold at least as well as the originals ... and if it helps only one, then it was already worth it.
Print instructions
Print the holder as supplied with support ("Support on build plate only" in PrusaSlicer; see screenshot). My settings for PETG:
Layer height: 0.2
Perimeters: 3
Infill: 30% (Pattern: 3D Honeycomb)
Depending on the door stop and whether the lower or upper holder is required, the holder must be mirrored in the slicer on the Y axis.