Flurff Zenes Cat Toy Replacement Parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Base, Battery Cover, & Butterflies for the Flurff Zenes Cat Toy
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 21
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement parts for the Flurff Zenes cat teaser toy. My cat was destroying butterflies like crazy, and at $10 for a 3 pack of replacements I decided to find an easier, safer, and far cheaper replacement.
All objects can be printed without supports but they are recommended for the battery cover tabs if you have poor bridging.
In both the interest of safety (the original has a thin metal wire that whips around once the butterfly is gone) and convenience, both the base and butterfly have holes sized to fit a length of filament. This will act as the “wire” between them. I've found 10 inches to be a good length to perform similarly to the original. Glue is optional, parts are sized to be pressure fit.
Having a dialed in first layer is vital for the butterfly to print properly, the wings are only 1 layer thick to mimic the flapping motion of the original.
Recommended layer height is .2, 20% infill.