1 / 5
Ferris Sweep High Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The case for the sweep keyboard with tenting ability.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 42
- Makes
- 0
- Views
- 859
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The split keyboard case is used for the Sweep High type. The design was inspired by Artemis Stiles. It supports screwing the PCB to the tenting puck screw position. It also allows to directly attach a (camera mini tripod with) ¼ screw 5 mm in length.
Note: the tripod mounted hole is too narrow. you have to use a scissors to expand the hole or using nut insert. I will fix it soon.
BOM
- 4 x M2x3x3.5 brass heat insert
- 4 x M2 screw
- 1 x ¼ - 20 UNC * 5mm brass heat insert or use scissors to expand the tripod mount hole
- (optional) Foam with a 2mm thickness
Technical Details
- Case Height: 9.7mm
- Case Length: 123.5 mm
- Case Width: 105 mm
- Wall Thickness: 5 mm
- Bottom Thickness: 6 mm