QIDI X-Smart 3 Side Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Side Spool Holder due to space constraint at the back.
- Rating
- 4.833 / 5
- Likes
- 54
- Downloads
- 424
- Makes
- 11
- Views
- 1,456
- Reviews
- 12
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Hi all,
Due to space constrain in the office, I had to mount the filament on the side.
Just looking around for spool holders and thought i should just practice 3d modeling and use the mount from another designer.
2 type of spool holder
Using the original holder or another by itself.
Print it flat down (with tree/organic support for the holder that uses the original holder.
Do use a pcs of rubber or foam tape to hold it in place
Also use a PTFE tube to guide the filament without the two, there may be some feeding issue.
Print setting as you prefer.
Setting I used:
E220 B60
0.2mm Layer Height
15% infill, Grid
3 wall, 4 Top and 3 Bottom.
Thank you for viewing!