1 / 12
Daylight On A Stick Prusa Enclosure LED
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Is the Official Prusa Enclosure LED bar too expensive? Use the Voron Daylight on a Stick to light your way!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Use the Voron Daylight On A Stick by Blamm for your Official Prusa enclosure. This fitting will save you having to spend an extortionate amount on the Prusa lighting solution. This can be used with or without light diffuser. These LED's can be stringed together for even more light!
Printed Parts Required
- Fitting x2 @ 15% infill, 0.2lh
- Diffuser x1 (Print in clear and the part is optional) @ 100% infill, 0.2lh
Parts Required
- Daylight on a Stick (270mm)
- Square Nut x2
- Hex Nut x4
- 8mm Button or Socket cap screw x2 (For LED to Fitting)
- 10mm Button or Socket cap screw x2 (For Fitting to Enclosure)
- 12mm Button or Socket cap screw x2 (For Diffuser)
Installation
The cables are wired directly into the Prusa PSU for 24V. DO NOT use the PSU for the 5v version of the Daylight on a Stick (RGB).
Where to buy Daylight on a Stick