MH-ET LIVE / ESP32 DEVKIT WIFI+BLE case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple case for the MH-ET LIVE ESP32 / 38Pin / 55mm x 28mm
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 82
- Makes
- 0
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Because I simply could not find any suitable enclosure for my MH-ET LIVE / ESP32 DEVKIT WIFI+BLE, I designed my own one in tinkercad.
I needed an enclosure which has some space for other components beneath the ESP. In my case it should fit a max98357 amplifier. Further it provides two options to route extra wires out or in. The second hole can also be used for external power in, if you don't want to drive the extra components from the ESP it self.
Please have an eye on your board dimensions. There are many variants out there with different form factors.
This enclosure is for the 55mm x 28mm version with 38 pins.
Further, because of the small size of the enclosure the ESP wont fit if you put regular DuPont cables on it. You either have to use the tiny ones or solder the wires to connectors, like I prefer it to do.
The enclosure designed to loose fit, because I like the easy access. If you prefer a snug fit print the center part at 101% size.
Print instructions:
- Material: PLA / PETG
- Layer height: .2
- Perimeters: default settings
- Supports: not needed