Magnetic whiteboard marker holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic whiteboard marker holder for 5/8/10 markers
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 167
- Makes
- 3
- Views
- 736
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Marker holder with magnets!
Uses 20x6x2mm magnets.
Variants for 5, 8 or 10 markers.
25mm holes fit all marker types I have ever come across.
5 and 8 variants fit on MK3. For the 10 marker variant, you will need something slightly bigger. Or just print more than one!
Print instructions:
There are 2 rows of magnets inside. The magnets are fully enclosed. You will need to stop your printer at 22.5mm and 60mm Z-height to add the magnets. In total, there are 8/14/18 magnet holes depending on model. You don't have to fill all of them, but for best holding ability, you should. It will still hold on vertical whiteboard, if you only fill half of them, but barely.
If there is any magnetic part near your hotend(such as the MBL probe on MK3 and MINI), take care to orient your magnets properly. The bottom row of magnets will happily stick to the steel sheet of your printer. Hovewer, the top row has to be attracted to the bottom row. If it's not, the magnets will jump out when your extruder passes by. Don't ask me how I know 🤬
This model doesn't require supports, or any post-processing.