1 / 2
BentoBox Base with switch cutouts and wire management
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Added switch cutouts, pass through ports, and a wire area
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 39
- Makes
- 0
- Views
- 1,350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Added switch cutouts for the switch I purchased from AliExpress, added two pass through holes for wires, and made a cutout in the back to have space for wiring. I should have purchased a 3-positition switch, but used 2 switches to allow for turning on all the time, or using a thermo-switch (35 C).
Here's the tinkercad I used if you'd like to edit for your application: https://www.tinkercad.com/things/icNQh55cqvr/edit
I'd make the cutout deeper (used 3.5 mm, could be 4.5-5 mm) and slightly wider pass throughs (used 5, could be 6 mm).
Enjoy