Plain Nozzle Box (print-in-place, for 25 MK8/V6/Volcano Nozzles)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A nozzle box that fits 25 MK8, V6 and Volcano nozzles. Prints in place. Remains closed with magnets.
- Rating
- 4 / 5
- Likes
- 14
- Downloads
- 144
- Makes
- 4
- Views
- 691
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the original nozzlebox with options that fit Volcano and MK8 nozzles. Like the original, it prints in place and is locked by a magnet (6x2mm!) and an M3x6 (or smaller) screw.
It doesn't come with any markings so that one can just add a sheet of paper (of which I attached a paper with the exact dimensions for a print-out)
The contraption is printed at an angle so that even dirty nozzles should fit – the bottom of the contraption is 7mm apart while the top is 6mm or 5,8mm.
Thank you very much @dodasch and @reemo for the original model and the description.
If you want to change anything, feel free to use the Oneshape Documents
- The Onshape Document contains both versions from @reemo (6mm diameter)
- 25 Nozzles Box Oneshape (V1 has a 6mm diameter and the newer ones have 5,8mm)
- 45 Nozzles Box Oneshape (5,8mm diameter)
The box parameters can be changed easily, the tolerances and angles will probably be a bit trickier.
Printing
- 0.2mm layer height
- Well tuned flow (maybe lessen the outer-wall flow) so the hinge and the ball print properly
- I used the
Assembly
- Press the 6x2mm magnets into the holes on the bottom part (i used a bit of superglue)
- Screw the M3x6mm countersunk screws into the base of the top part
Warning
- I didn't print the standard version, but reduced the height of the contraption and the box compared to the volcano box.
- I didn't have 5x2mm magnets, so this version uses 6x2mm magnets. I can provide a 5x2mm version if there's demand for that.
Other Versions
Important:
- Make sure you post a make so I can see I'm not wasting my time xD
- If you have any questions, ideas, concerns and objections please let me know.
- I will ad testprints in a few days or weeks so you dont have to Print the whole box to test it out which top diameter you need. I recomend the 5,8mm
