SKELTER5

  Update* added separate camera plates for DJI 03. Skelter V2 frame now available https://www.printables.com/model/618791-skelter5-v2

A 5" freestyle frame. Designed to provide a balance between durability and agility; while still maintaining great frame resonance to reduce gyro noise. Last but not least, multi video system support with 20, 25.5, and 30.5 mounting in the rear.  

 Frame cutting services

• cncdrones (cncmadness) and armattan productions are a couple recommendations
• I recommend cncdrones if you are in the US 
• make sure to email them with all frame dxf files, as well as part list and diagram
• an email will only be for the carbon, unless otherwise stated.
• cncdrones will provide all necessary hardware when available on their website  
• you can always ask if they have available hardware

 Frame hardware

•  (6) M3X8mm for top plate
• (2) M3x6mm countersunk for top
• (4) M3x10mm bottom front and rear
• (4) M3x12mm bottom through pressnuts 
• (4) M3x16mm bottom through arms
• (2) M3x8mm camera cage
• (4) M3x25mm countersunk for 30.5mm stack
• note (4) M3x8mm if using 20mm stack
• (16) M3x8mm for motors
• (7) M3 20mm standoffs
• (2) M3 28mm standoffs
• (8) M3 pressnuts 
• note cncdrones will install pressnuts if ordering through them

Carbon list

• (1) top plate 2mm
• (1) bottom plate 2.5mm
• (1) mid plate 2mm
• (1) center plate 4mm
• note can request center plate at 3mm. That would require 25mm stack screws to be slightly filed down
• (2) camera plates 2.5mm
• (4) arms 6mm

My hdzero build

• foxeer reaper 65a esc
• foxeer f7 flight controller
• hdzero freestyle vtx
• nano90 camera
• radiomaster elrs
• newbeedrone flow 2306.5 1850kv
• rchacker 1300mAh 6s battery
• gemfan freestyle 3s 5.1x3x3 props
• auw without gopro 636g

frame weight no tpu 127g

Prints

• cam tpu 19_20 is reversable 
• alternative seperate 20mm cam tpu
• nano camera mount as well as three fixed angles for nano90 cam
• axii mount is compatible with lumenier axii 2, xilo axii, foxeer lollipop, and simular sized antennas 
• minion mount is for vas minion pro vtx antenna
• rear 220 gps mount uses two parts. The main part is designed for a 20mm standoff to pass through
• rear gps has three base lengths to accommodate different antenna configurations 
• universal gopro mount and front gps mount has spacing for standard washers, as well as countersink finishing washers
• two universal vtx antenna mounts
• one designed for stock included antenna, and other for antennas with 4mm tube
• universal vtx antenna has a tpu lock ring similar to what quadmula uses
• different receiver antenna mount. Universal as we as specific. Radiomaster and betafpv are a more durable mount. May fit others as well
• couple other prints are labeled with elrs in their description. Those are incorporating the standard thin happymodel style antennas
• xt60 grommet for top plate to protect the power leads from being cut up

additional dxf file and scale image for battery pad. Used with cricut machine 

 I hope you enjoy this frame as much as I do. If you have any questions feel free to ask. Don't forget to check out the wu tank max2 and other frame from ledrone.club