1 / 4
Flipper Zero - CC1101 Board by TehRabbitt - Case Pin Boot Cover
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pin protecting cover/boot for the case created for the CC1101 board (TehRabbit).
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 55
- Makes
- 0
- Views
- 599
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This boot cover is made to fit my Flipper Zero - CC1101 Board by TehRabbitt case found at the following locations:
- https://www.printables.com/model/606834
- https://www.thingiverse.com/thing:6122121
- https://github.com/CodyTolene/3D-Printing/tree/main/Flipper%20Zero%20-%20CC1101%20Board%20by%20TehRabbitt%20-%20Case
My print settings:
- Hatchbox PLA
- 0.2mm layer height
- 0.4mm nozzle (line width)
- Enable retraction
- Wall count 3 (+ print thin walls enabled)
- Top/bottom layers: 4
- Infill density: 20%
- Infill pattern: Cubic
- Print temp 200 C
- Bed temp 60 C
- No supports needed
See more designs on my GitHub here: https://github.com/CodyTolene/3D-Printing
Enjoy!