250mm Replacement Fridge Door Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A design based on the original fridge door handle for Beko DEN477WD/DEN477MWD fridges. Might fit other models as well.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 146
- Makes
- 1
- Views
- 636
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A design based on the original fridge door handle for Beko DEN477WD/DEN477MWD fridges. Might fit other models as well, check dimensions and adjust as needed.
To prepare the print, I recommend you use the cut tool from your slicer to cut the handle in half and then glue the halves together. This way there is no waste material used on support and less post processing to do afterwards. Something like this should work nicely:

(I'm currently running into some issues that interferes with exporting pre-cut models from the slicer like in the image above. Will attach them at a later time if the issue is fixed.)
For sturdiness I recommend utilizing many perimeters/wall loops, I printed mine with 10.