1 / 15
Hexagon Desiccant Containers - Free Standing or Attach to Honeycomb Wall — image 1
1 / 15

Hexagon Desiccant Containers - Free Standing or Attach to Honeycomb Wall

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Two Hexagonal Desiccant/Silica Gel Beads Containers. Comes with a stand for a use anywhere or honeycomb wall connect

Rating
0 / 5
Likes
4
Downloads
24
Makes
0
Views
357
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Hexagon Desiccant Containers – Stand-alone or for Honeycomb Wall


3D Printed Parts

1 x Large Desiccant Container

1 x Large Desiccant Container Lid

1 x Small Desiccant Container

1 x Small Desiccant Container Lid

4 x Inner Container Connectors

 

3D Printed Parts Options

 

Option 1

1 x Stand (for stand-alone, place anywhere)

Option 2

2 x Honeycomb Wall Connectors(Normal Wall Orientation)(marked with T for top connector and B for bottom connector)

Option 3

2 x Honeycomb Wall Connectors(90 Degrees Rotated Wall Orientation)(no markings)


 

Parts Needed

1 x Round Hygrometer with clips at 5 and 11 o'clock positions(viewed from the front)

325g approx. of Orange Desiccant/Silicon Beads(re-usable)

Desiccant Amounts Needed for individual containers

Small Hexagonal Container = 90g approx.

Large Hexagonal Container = 235g approx.


Filaments Used

eSun PETG Transparent Blue

Geeetech PETG Transparent


 

Print Settings

Layer Height = 0.2mm

Walls = 4 for large container and lid(1.6mm), 3 walls for small container and lid(1.2mm)

Support is only needed for the large container. Use Hybrid Tree, on build plate only, remove small overhangs.


 

Assembly Instructions

Slide the 4 Inner Supports, pointy part upwards into the slots on the side of the Small Desiccant Container.


Slide the small container with supports now attached, downwards into the centre of the large container, rotate and align with the slots on the inside.

Fill up with fresh silica gel/desiccant beads to approximately 5mm from the top, use the funnel in each of the corners of the containers. Place the lids.

 

Slide the connectors on the back of the large containers, downwards into your choice of either the stand-alone stand or the two honeycomb wall connectors.



 

 

Tags