Counting matching models…
A simple but effective freestanding 3D F1 logo. The logo is designed with a discrete backing to keep the lettering upright and spaced. The backing also means no base is needed as the logo is self supported. Perfect as a home decoration or…
Update 01/05/2023 Added “HSW Ez-V1 Foot Type 3 v1.0” Update 01/05/2023 “HSW Ez-V1 Foot Type-2 v1.0” added for better stability on taller walls and for double-sided walls. -------------- These feet use the Ez-V1 series clip and therefore…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
A freestanding replica 3D NASA worm logo. The logo is designed with a discrete backing to keep the lettering upright and spaced correctly. This design is a replica of the NASA worm logo but has been tweaked very slightly to make the “N”…
A freestanding 3D SpaceX “X” logo. The logo is designed with a discrete backing to keep the lettering upright and spaced correctly. If like myself you are a massive fan of SpaceX and everything they do then this is the perfect print for…
Print Settings: .30mm, 5% infill, No Supports. Rotate 45 degrees on print bed. I added a version with a thicker back ( Freestanding_Sunglass_Rack_4mm_back.stl )
Letter vary in height and width from about 65mm to 80mm and are 20mm thick. They can of course be scaled to the required size. For a nicer front finish, try flipping the letters face down if you have a smooth or textured build plate.…
These T-Slot nut were made especially for the prusa mini aluminium extrusion (289mm) found on the official GitHub repository. The major advantage of these t-nut is that they are made to be freestanding, once turned 90° inside the…
Remix of Dom's Peanuts-Woodstock model for freestanding print display. Remix printed with Prusa Pineapple Yellow and Matte Black PLA; 0.20mm Layers; nice 15% infill; no supports. X and Y dimensions can be adjusted to fit display needs. A…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
This is just Westy's GPU support, but with a wider base at the bottom and a larger “shelf” on top to support your card. I also scaled the base 1% larger, as the screw was far too tight to screw in all the way.
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
https://www.buymeacoffee.com/maxt ---------------------- FEMALE VERSION: https://www.printables.com/model/334054-christmas-deer-female-freestanding-use-christmas-o 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
This is a freestanding mount for a Buddy 3D camera. I wanted a mount that wasn't attached to the printer (to reduce vibration and improve stills) while adding additional height and a slight tilt (20 degrees). Posting so it may benefit…
This small shelf holds my coffee paraphernalia and is comprised of 2 3D printed legs and a plywood board. I attached self adhesive rubber feet to the bottom to prevent any wobbling/sliding. The legs are 200mm high and have 2 screw holes…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
https://www.buymeacoffee.com/maxt ---------------------- MALE VERSION: https://www.printables.com/model/334049-christmas-deer-male-freestanding-use-christmas-orn 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it…
About This is a modular, lightweight shelving system I designed and printed for my home office. It is designed to be placed flush up against a wall. I've gone two shelves high without any fixing to the wall however you could go…
Details This is a Wiha screwdriver holder I designed to lock onto a French Cleat on your Ikea Skadis pegboard, or with the push of two buttons, can be removed to stand freely on two legs that fold into the sides. For the pushbuttons I…
This unique "Welcome" desk sign is a stylish and sustainable way to warmly greet your guests. Crafted from eco-friendly PLA material using 3D printing technology, it’s made with a commitment to preserving natural resources—no trees were…
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Heartbeat Wall Art - Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. Clean lines. One rhythm. One heart. This design turns the universal heartbeat…
This is a model for a simple set of shelves that are great for holding small pocket sized items. I use mine to hold those ubiquitous Bluetooth earbud cases and other small electronics. Each individual shelf is 125mm wide, 70mm deep, and…
Aerial Bomb Lamp, hanging or freestanding (My Take) Design to be printed in 2 pieces and assembled. Assembled dimensions is 19" by 6". NOTE: if this appears tiny in your slicing software, scale it up to 2540%. That should be the correct…
remix of Prusa Mini Freestanding T-Slot Nut by Olivier modified to fit m3 thread inserts instead of m3 nut one can find it more convenient printed with no infill and 3 perimeters out of PLA
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
This Build Plate Holder has been especially designed for Creality K1C build plates but can also be used for the Creality K1 build plates or any other build plate with the dimensions of 235 mm x 235 mm like e.g. Ender 3 V3 SE or Ender 5…
Horses Wall Art – Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. Features a black silhouette deer with tribal-inspired swirl patterns and fine…
I was trying to use my Multiboard for a hardware organizer but didn't want to mount it on the wall (yet) and the normal freestanding leg wasn't providing enough stability and it was getting very front heavy. I created two new legs, one…
A stand / holder / organiser for a variety of Dremel bits and accessories. This is a large flat print - watch out for warping (which you can see in my print). I strongly recommend big mouse-ears for the corners when slicing. Take care how…
I modified this freestanding sunglass holder to be taller; holding 5 pairs instead of 4.
This is a remix from: https://www.printables.com/model/170489-skadis-mini-filament-spool-shelf I have modified the shelf to be freetsanding, also in 3 sizes so that can be displated in a stadium arrangement.
UPDATE - Now features 3 alternative roof, body and feet designs. Also a base suitable for an LED tealight style light source has been included, with the option to add the reflector later if necessary. Mix and match the styles of parts,…
Free-standing feet for IKEA Skadis pegboard. Useful for situations where you can't or don't want to attach the pegboard to a tabletop or wall. Print details 0.2mm print layer 0.4mm nozzle PLA (Bambu Lab PLA Matt Grey) 3 walls 10% infill
Celebrate the spirit of this lovable breed with this 2D Westie wall art, featuring the profile of a West Highland Terrier with its paws playfully upfront. This design captures the adorable charm of the Westie, and it’s paired with a…
Lion Wall Art – Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. Features a black silhouette lion with tribal-inspired swirl patterns and fine…
A self-supporting spoolholder for normal spools with a maximal width of 85 mm. Print Setting recommendation: no supports. 3 shells 8-15 % infill PETG
This sculpture features the traced outline of two dogs in a minimalist, freestanding design. Ideal for home or office decor, it adds a modern artistic touch to any space. Key Features: Minimalist dog outline design Freestanding and stable…
This is simple freestanding photo frame in two variants for landscape and portrait photo. Print settings - in brackets settings for the back part: Layer height: 0.2 mm Perimeters: 3 Solid layers - top/bottom: 5 / 5 (4 / 3) Infill: 15%…
Deer Wall Art – Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. Features a black silhouette deer with tribal-inspired swirl patterns and fine…
I had left over legs from using the IKEA Lack tables in a different project, so I used them to help create a freestanding filament spool holder. It works very well and is incredibly rigid. The print is universal, so be sure to print 2…
This model features a stylized side profile of a West Highland White Terrier (Westie), beautifully combined with an elegant floral motif, and it’s paired with a convenient holder, allowing you to either hang it on the wall or let it stand…
A simple, but perfect fit holder for your Shelly motion. Very practical if you move the sensor around the house for different scenarios. Print with at least 3 perimeters and 0 (zero) infill. *For private use only. If you think that is a…
I uploaded this from the model I created and published on MakerWorld: https://makerworld.com/en/models/893600#profileId-850862 PRO TIP: Wait a few minutes after printing before removing your sign from the bed (this helps prevent bending…
Requires 8/m3x10mm (or longer). The back plate that buts up against the front plate is optional. I have it there because I wanted to be able to put some shorter tools that don't reach the back plate. Screwdriver models credit: Michael…
A simple but effective freestanding 3D F2 logo. The logo is designed with a discrete backing to keep the lettering upright and spaced. The backing also means no base is needed as the logo is self supported. Perfect as a home decoration or…
This is a collection of parts to make a guitar stand/wall hook out of freestanding timber. This print requires a significant amount of other material. The original idea behind this model was to avoid screwing into masonry walls. However,…
Parts to build a freestanding desk shelf
A freestanding screw driver stand for six small screw drivers with octagon shafts. Works well for a screwdriver shaft between 7-8mm. The design also has provisions for magnets 20mm L x 5.75mm W. Legs are tapered and fit snugly into the…
Romantic Couple Wall Art - Freestanding Decor is a dual-function decorative model that can be used as wall art or displayed as a freestanding ornament on its stand. The silhouette of a couple with a central heart symbolises love and…
A double mounting system for a dial gauge for 3D printer calibration. The brand of the dial gauge is unknown but the mounting surfaces are 13.8mm external diameter. One mount is meant to slide onto a 12mm rod, and the other is designed to…
Remixed to reduce filament used on main body by ~32%. Supports are needed for the 4 end-caps. Uses 4 608 bearings.
A simple but effective freestanding 3D F3 logo. The logo is designed with a discrete backing to keep the lettering upright and spaced. The backing also means no base is needed as the logo is self supported. Perfect as a home decoration or…
Free standing and printed with no supports. These name plates are customizable is a lot of ways.
This is a remix of http://www.thingiverse.com/thing:1070481 REQUIRED, 4 x 608ZZ type bearings I made a few changes. First, I added legs for free standing use. I made some visual design changes and I changed the rollers. The rollers now…
A spicerack meant to stand on its own feet, and allow for efficient storage in cabinets, or on the kitchen counter. It perfectly fits four 55mm or five 45mm containers. The tolerances are tight, but that is good as it makes the structure…
Model 1: Light Bulb - Base - Threads Single perimeter (minimal material, strong enough for screw mount) Variable layer height (maintains thread consistency) Estimated Print time: 30 mins Model 2: Light Bulb - Bulb - Threads Spiralized…
Dovetail wedge used to connect MaxIT Knect-A-Shelf freestanding plastic units. Made exactly for:…
I collect Quite a few of these Pill Bottles that come with Crazy Glue so I decided to turn them into free standing parts storage system it fits 30mm / 65mm bottles but you scale it in your slicer to fit whatever size you need Category:…
A tiny sign, a useful thing, These 3D prints, convenience they bring! Flat from the printer, filament light, Just fold the flaps and they stand upright. A name card, a label, your choice to make, Select the size, for goodness' sake! In…
Two of my family members wanted the drying rack for their Bissell Crosswave parts, but neither one wanted to mount the wall. I redrew the holder from scratch and integrated a stand that just slides together. There is a 0.1mm gap on the…
Extended the nose rest of bottom two holders to hold deeper glasses (e.g., cycling wraparounds)
Freestanding mount for 3 30mm arcade style buttons. A mounting area on the back side allows for the placement of an Adafruit perm-proto half-sized breadboard. Two additional mounting holes on the back allow the entire assembly to be…
A free standing mount for four 30mm arcade buttons. The mount can support an adafruit perm-proto board or the new Adafruit LED Arcade Button 1x4 stema board. Additionally by using t-nuts, the mount can be attached to an 8020 series 10…
Even in highest position oven was slightly lower than countertops on both sides. This foot simply adds 12.5mm to the hight, in my case enough to do the job with some wiggle room.
Intended for a printer of minimum 300x300 build area. Supports needed. Rendered with some example models for sense of scale. Prints in 2 parts, the shelf module and the base. Shelf then snaps into the holes in the base. Category: Decor
I found my freestanding multiboard setup to wobble too much when loaded with tools so I made a cross-brace to fix it. If there is interest I will make a parametric version for different size tiles, but this is 9x9 tile size (spans 7x7…
No supports needed This is actually a remix of someone else's model, but I can no longer find that person's model, or I would be giving credit. I modified their model, which was a 5 slot, and theirs had the rounded feet stabilizers at the…
Freestanding 100mm Hot Glue Gun Stick Dispenser Convenient way to store and dispense your hot glue sticks in one tidy area. I have printed this is Petg Matte HS by Jayo but I'm sure pla will also be suitable. settings I used. 0.20mm layer…
I designed these brackets because I wanted a small pegboard for my desk and didn't want to drill holes in the wall or make a heavy frame out of wood. I came up with this simple idea to use two pieces of pegboard from the hardware store…
A clean MagSafe desk charger inspired by the Apple Mac Mini. The MagSafe puck sits in the center so your phone lies flat — keeping it out of sight and reducing distractions while you work. Two versions included: Freestanding – a simple,…
Freestanding mount for 3 24mm arcade style buttons. A mounting area on the back side allows for the placement of an Adafruit perm-proto half-sized breadboard. Two additional mounting holes on the back allow the entire assembly to be…
I have a wooden freestanding coat rack. Achelle Coat Rack with 11 Hooks Tobacco - Coaster Fine Furni (coasterfurniture.com) First, one of the coat hanging hooks cracked. It was a minor inconvenience having a missing hook for several…
I needed a way to walk around an object when I manually laser scanned it with my Revopoint Metrox 3d scanner and tables were just too large to do the job, so I created this cheap solution. Parts list: 1. (1) M6x35mm flat head screw 2. A…
A spool holder that just works, simple parts that should print out well on any printer. Easy to assemble, robust, and easy to work with. Print with supports on, tree supports work the best. 20% Infill, 3 walls. If you prefer to print all…
Blend modern 3D design with pure emotion. This "You & Me" infinity photo holder is the ultimate Valentine’s Day gift. Its clever interlocking design allows you to showcase your love story wherever you prefer. Technical Details: Strong…
Would you like to hang your toilet paper without having to drill into your walls? Now you can! Using my Infinistick system, you can print a shaft in any height you need (I went with 6 segments), screw it together, screw it into the base…
Each model has already inserted pause at layer where you insert your picture. Then continue print.
I made this simple plate holder to sit next to my centauri carbon. It can hold 3 of any equally sized plates as the stands are seperate. You will need to print 2 :). The feet slide neatly underneath the Elegoo centauri carbon so it can…
Here is a fun print - Christmas Tree Tabletop Decoration - Freestanding, perfect for the Christmas spirit and season! Hope you like! Want a Commercial License to sell my prints? Join my Patreon or Thangs as a paid member 😊…
I have printed the original parts and when everything was complete, I have realised that the rising of the 3D printers feet only does not help. I have to rise also the side boxes. So there is a freestanding connector to fit the original…
Printed in Sunlu Green PETG on default settings without supports and combined with @3D.Nystad's AnkerMake Spool Holder to save me having to unload my Sunlu S4 for a one off filament print.
G1 screw for freestanding washbasin faucet / basin tap. Original had too long heading to fit under my table with thicker desktop. Printed with standard settings for 0.2 height and 15% infill.
free standing mount that uses the stock magnetic plate only problem is that the angle of the screen is the same as stock, will probably change that but currently out of filament so it will have to wait, I recommend at least 3 horizontal…
This was designed to replace a broken glass vase designed to hang on a 3mm (1/8") diameter wire hook. I also included a version with a broader flat base so that it could be used freestanding.
Exactly as the title says. 7 high currently avaliable, more to come later
A freestanding oval bathtub for 1:12 scale dollhouse bathrooms and dioramas. The curved basin sits on a solid plinth, paired with a wide ledge shelf and a slender standing faucet for a complete miniature bathroom scene. Measurements:…
Two different positions for the LED light bar. Provides task lighting that can be quickly dropped in when required. Light bar slot is 0.72" x 0.08" (18.288mm x 2.032mm)
Need a bit of horizontal space for bubble bath, a razor, scrub, etc while bathing in you freestanding tub? Printed here in PET-G and set to the angle of my tub, the x or y scale could be changed to accommodate other angles. The “clamp”…
bei diesem Remix Handelt es sich um eine Freistehende Kamerahalterung für die Buddy Camera von Prusa, ich habe die Halterung am original entfernt und Löcher für M3 Schrauben eingebracht so kann der Mitgelieferte Kamerahalter einfach…
A parametric display stand for the LEGO Saturn V that simulates a fiery engine ignition. This 3-part stand uses a standard flexible LED strip and cotton wool to create a glowing smoke/fire effect while keeping the electronics safely…
Quick modification to let me use these screwdrivers in a little portable rack. I don't have the imperial set, but assuming the handles are the same size it should fit them too.
Its like a dock that stops your quest 2 or 3 from flying across the room, still plenty of space for charging wire.
If you need to place your spool holder for Wanhao Duplicator i3, Cocoon Create, Maker Select, and Malyan M150 i3 3D printers, (designed and tested for Wanhao Duplicator i3 assumed sameness) somewhere other than the top or controller box.…
I am addicted to messing around on Tinkercad, today's messing is a freestanding desktop sign
Sometimes you just need to keep the dog away from the front door. This is a foot that snaps in to the North States MyPet Paws Portable Pet gate (Model 8870/8871) and lets you just pick up and move the gate rather than needing to install…
Bring realistic road play to life with this set of freestanding round traffic signs 🚗🚦, perfect for toy cars, road layouts, sensory play, classrooms, and imaginative small-world setups. Each traffic sign features a clear, recognizable…
