1 / 5
Bandsaw to DeWalt vacuum port adapter — image 1
1 / 5

Bandsaw to DeWalt vacuum port adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This will fit several makes of tabletop bandsaw to allow dust extraction via the standard DeWalt vacuum connector port

Rating
0 / 5
Likes
5
Downloads
33
Makes
0
Views
221
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This port adapter was designed for my Titan bandsaw to allow it to connect easily to my DeWalt based shop vacuum system for dust extraction.

Whilst I only own a Titan bandsaw I believe that the same sized hole with three (or four) mounting screws is used on several other makes of bandsaw including Einhell, Draper, Scheppach, Record, Lumber Jack, SIP, Zipper, Sealey, Fox, Charnwood, and many many more…

It's an easy print in PLA, generally requiring no supports or build plate adhesion. Just use your default material profile.

Print with a high infill between 60-100% for strength and also to allow you to drill the three (or possibly four) mounting holes required to match your specific make of bandsaw.

I used the original vacuum port part as a template for the holes.

If you like this model then please remember to hit the heart button.

 

Tags