Prusament Hygrometer Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.33 – €0.41 net (excluding VAT)
For file: Prusament Humidity Sensor Mount v1_0.2mm_PLA_MINI_24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.37 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 24 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Friction-fit mount for a circular hygrometer (humidity sensor) into a Prusament spool.
- Rating
- 4.727 / 5
- Likes
- 42
- Downloads
- 126
- Makes
- 12
- Views
- 981
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
This is a mount for the popular circular hygrometers (humidity sensors) to fit within a Prusament spool. It's held in place in the spool by friction, and the hygrometer clips into the mount.
There are several other posted models for mounting a hygrometer in a Prusament spool, but the ones I saw all included a desiccant container right behind the sensor, which I felt would not do a good job of reflecting the ambient humidity in the space. See https://www.prusaprinters.org/prints/36207 or https://www.prusaprinters.org/prints/35562 for examples if you prefer that approach.
The specific hygrometers I purchased are https://www.amazon.com/gp/product/B07GR67G1M/ and measure ~41mm across the back. The mounting hole is 41.5mm wide to accomodate the built-in clips, so it holds steady but can be turned by hand within the mount. You'll need to resize the mounting hole if your hygrometer is a different size or doesn't have the same type of clips.
This prints easily face-down, I printed it with PLA at .20mm with PrusaSlicer's default settings.
EDIT: I re-made this model in OpenSCAD and uploaded the file, so you can now customize the opening or any other variables as needed. The original model was made in TinkerCAD.