1 / 4
Elegoo Neptune 3 Pro, Plus and Max - Minimalistic Cable Management Mod
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small brackets that fixes the cable management issue wit the Elegoo Neptune 3 printers (IHMO).
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 118
- Makes
- 2
- Views
- 1,811
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since my first print with my Elegoo Neptune 3 Max I was extremely disapointed with the cable management. Especially the fact that the cable to the extruder hangs down and hits the print/bed. I made this mod so I wouldn't have to add a cable chaing but instead tried to use the built in one-way-stiff-structure of the flat cable. Note: When folding the cable over, be very careful to leave a nice curvature so you do not damage it.
- The Extruder part replaces the original metal plate. You can use the two original screws to attach the new part.
- The Z-axis part replaces the small plastic clip that holds the cable to the Z-axis. You can use the original screw to fasten the new part
- The Base part replaces the plastic clip that snaps into the bottom/base frame. The new part should snap into place in a similar way as the original part.