Elegoo Neptune 4 Series Webcam Camera Mount C270
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print webcam mount for Neptune 4 series.
- Rating
- 3 / 5
- Likes
- 63
- Downloads
- 528
- Makes
- 2
- Views
- 3,146
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Recreation of the left x axis cover with mounting point for a Logitech C270. Had to raise the height of the cover to get enough clearance for the cam. The screw from underneath is a bit fiddly to get in, but it works.
I've included the Fusion 360 file so you might want to create your personal webcam mount.
If your webcam service is disabled, SSH into your printer (user: mks | password: makerbase) and run the following commands:
sudo systemctl enable webcamd
sudo systemctl start webcamdFirst one enables the service on boot, second one starts it for the current session.
In Klipper open up your settings and create a Default camera. Leave the settings as the are (if you need to flip the image you can do so later on).
In your configuration folder should be a webcam.txt. Edit to your needs - USB camera is always /dev/video4.
Print settings: Optimized for a .4 nozzle with 0.2 layer height. 25% infill might be overkill. Put some support under the pivot overhang.