Bambulab Poop Chute
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A closed Poop Chute Bag for P1P, P1S and X1C
- Rating
- 0 / 5
- Likes
- 32
- Downloads
- 191
- Makes
- 0
- Views
- 4,611
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I currently advise against using the model, as there is a possibility, albeit minimal, for small amounts of filament residue to fall through the small bamboo window openings.
When I have the time, there will be a new version released.
I designed it in the hope that I thought maybe I could make my already relatively quiet p1p (thanks to the enclosure) even quieter and also make it more challenging for dust.
As for the quieter noises, I personally can't really perceive them.
Depending on how well your printer is calibrated, you may need to use super glue for the 6x3mm magnets; I needed a total of 6 of them to ensure it doesn't move even with a lot of vibration.
A few more tips:
-Additionally, on the p1p, there's a screw above the poop outlet; you can use this as a reference point. Once the screw is just barely covered from the top edge, the thing is perfectly positioned in the right spot.
-If you want to achieve a better print quality than I did, try using more support for your model.
-I printed it upright at a 90-degree angle, but there might be an even more optimal position. However, it worked quite well with tree supports.
Like this model? Want to support me?
Buy me a coffee <3
buymeacoffee.com/pyz3d