Camera arm for Ender5 / Sovol SV05
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera arm meant to be installed on the top cross bar on a cube printer.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
I made this simple arm based off an old CCTV camera wall mount I had laying around. It's designed to be screwed on the top of a 2020 extrusion with an M4 screw and a hammer nut.
For my application I used the rest of the original hardware to mount my cam but I modelled those parts as I'm not sure if this was a popular mount type and others have access to the necessary parts. The base has a hole for a standard 1/4" tripod screw and a small indent on the top to have a room for some foam or rubber sheet to help securing the camera. The arm currently holds a 330 gram old IP camera without any problems. Please keep in mind that I only printed the arm the rest of the models are untested.
My print settings were:
- 0.2 mm layer height
- 4 walls
- 20% cubic infill