1 / 5
WIP OpenIPC NVR FPV/HiSilicon HI3536D Fan Case and Lid — image 1
1 / 5

WIP OpenIPC NVR FPV/HiSilicon HI3536D Fan Case and Lid

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Case and Lid for the HiSilicon HI3536D NVR Board. This board is used by OpenIPC for the FPV VRX Project.

Rating
0 / 5
Likes
9
Downloads
94
Makes
0
Views
1,364
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

WIP model of my NVR Case for use with OpenIPC FPV and Ground Stations.

This case is a remix of W's case that he posted on the OpenIPC Telegram page. Thx for getting me started.

This case features the following:

  • 50x50x10mm 12v fan slot, the ones shown are for some old PC RAM Cooler thing but im pretty sure any other similarly sized fan will work.
  • Dedicated Spot for internal Wi-Fi module and USB accessory.
  • All* the IO holes, (SATA, Baby Molex, and FRONT_TS ports are not used, the internal USB is some sort of connector that idk and there are internal pad that you can use instead.)
  • Gopro or Mini Gopro mounting holes for use with FPV goggles and things.

Things that still need doing:

  • more fan grill cross supports.
  • bevel and smooth away the edges of the fan slot cause its grinding.
  • Add dedicated spot for internal USB drive or SD card reader.
  • Add tiny gopro holes that you screw into with for your goggles and tiny action cameras, (seriously what is that and why cant we just use the normal gopro size).
  • Redo the lid for antenna mounting holes, (will do once the final version is done).
  • add exit vents.

Tags