DJI Mic Receiver Locking Cold Shoe Screw Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a locking cold shoe adapter for the DJI Wireless Mic
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 327
- Makes
- 0
- Views
- 1,594
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
This is a locking cold shoe adapter for the DJI Wireless Mic. This allows the receiver to be mounted using loose cold shoes using a nut.
I have tested this in multiple hot/cold shoes on different camera brands and have not found any issues.
I have tested this in multiple hot/cold shoes on different camera brands and have not found any issues.
You Will Need To Print
1 - Adapter
1 - Nut
Assembly
Slide the adapter into the desired hot/cold shoe
Thread the nut onto the adapter with the flange facing down.
Attach the DJI Mic Receiver to the adapter. Receiver will snap into place.
Print Settings
***Print parts as oriented in the STLs.***
Parts that are pictured were printed on an Ender-3 v2 with the following settings:
- Material: Any (ABS/ASA recommended if printed parts will be used outdoors or kept in hot environments)
- Nozzle: 0.4mm
- Layer Height: 0.12mm (0.2 is fine)
- Extrusion Width: 0.4mm
- Infill Percentage: 40%
- Wall Count: 4
- Solid Top/Bottom Layers: 5
- Supports: On (Needed to support area below threads on adapter)
Say Thanks
All my prints are free and will remain this way. With that being said, if this print helped you out or you would like to support me and my work, consider donating to me directly at: PayPal
Happy recording!