Universal stand for hand equipment
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€18.50 – €22.61 net (excluding VAT)
For file: prusament clamp doublesided x4_0.2mm_PETG_MK3S_22h41m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €20.55 excluding VAT (range midpoint).
- Weight reported by the author
- 228 g
- Print time reported by the author
- 22.68 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Universal stand allows to hold hand equipment like hotair rigid at place. Design allows for flexible position regulation
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 38
- Makes
- 0
- Views
- 406
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Universal stand allows to hold hand equipment like hot air rigid at place. Design allows for flexible position regulation.
You will need:
- 9x M3 inserts (external diameter 4mm, I've used 7mm depth, shorter should be fine)
- 2x 6mm linear rods (200mm for example)
- 1x V-slot 20x20
- 2x M3 hammer nuts for V-slot
- 1x M3 16mm
- 4x 12mm M3 screws
- 2x M3 10mm
- 2x M3 35mm
- 2x M3 50mm
Or use common nuts instead of inserts. Use rubber hammer to fit linear rods to holder.
In case of holding hot air take steps to not melt design by hot air gun, you can use some isolation between holder and hot air.