removable magnetic MMU PTFE tube holder for enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A MMU buffer has 5 tubes. Mount 5 PTFE tubes to your enclosure with this magnetic - REMOVABLE - holder
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 41
- Makes
- 1
- Views
- 490
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The 5 tubes exiting from the buffer, should go into spools. Mine are removable and hang above the printer in dry boxes.
The PTFE tubes are attached to my LACK enclosure. When you want to work on the buffer, it is best to remove the PTFE tubes frm the enclosure.
This fixture allows removing all 5 PTFE tubes from the mount screwwed to the enclusore. They are firmly hold in place with magnets. Best are 4 20x6x2 mm, but you can also use 4 round 8x3 magnets.
The plate is screwed to the enclosure and stays there.
It uses 5 PC4-M10 pneumatic couplers. These have 3/8 BSP thread.
Prints without support, but if you do not like large overhangs, paint some supports to it.