1 / 3
removable magnetic MMU PTFE tube holder for enclosure — zdjęcie 1
1 / 3

removable magnetic MMU PTFE tube holder for enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A MMU buffer has 5 tubes. Mount 5 PTFE tubes to your enclosure with this magnetic - REMOVABLE - holder

Ocena
5 / 5
Polubienia
5
Pobrania
41
Wydruki
1
Wyświetlenia
490
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The 5 tubes exiting from the buffer, should go into spools. Mine are removable and hang above the printer in dry boxes.

The PTFE tubes are attached to my LACK enclosure. When you want to work on the buffer, it is best to remove the PTFE tubes frm the enclosure.

This fixture allows removing all 5 PTFE tubes from the mount screwwed to the enclusore. They are firmly hold in place with magnets. Best are 4 20x6x2 mm, but you can also use 4 round 8x3 magnets. 

The plate is screwed to the enclosure and stays there.

It uses 5 PC4-M10 pneumatic couplers. These have 3/8 BSP thread. 

Prints without support, but if you do not like large overhangs, paint some supports to it.

Tagi